Home Theater Setup

by Nicole Nguyen 0

When the Oscars go live at 5:30 p.m. EST / 2:30 p.m. PST, you can feel like you're right there on the red carpet, rubbing shoulders with Jennifer Lawrence and Ben Affleck, with an at-home, do-it-yourself Dolby Theatre.

A successful home theater system is a complete audio and visual experience. If you've got a big-screen-display-and-audio set ready to be installed, we'll show you how to set up an Academy-Awards-worthy home theater for your Oscar-viewing party — or, with a little bit of accessorizing, tinkering, and feng shui rearrangement, how to create one with existing equipment.

The Home Theater Trifecta

• TV Display — You'll need a big screen to watch the red-carpet bonanza and tearjerking acceptance speeches unfold. Large TV displays can cost a fortune (remember all of those quadruple-digit price tags at CES?), but there are solid smaller-size models that don't cost an arm and a leg, like the 32-inch Samsung UN32EH4003 ($284).
• Cable or Satellite — We've been talking about cutting the cable cord in favor of a media-streaming device like Roku, but those TV boxes are pretty useless for watching the Oscars. ABC won't stream the Academy Awards online, so you'll need a cable or satellite subscription this time around. Basic antennas [RCA Basic Indoor Antenna ($9)] are fairly cheap, however, and can be found at Target, Best Buy, Amazon, and other big-box retailers.
• Surround Sound — A good audio system can make you feel like you're in the audience next to George, Matt, and Brad. Ideally, a surround-sound experience needs two side speakers, two rear speakers, and one center front speaker. You can buy a complete theater sound set [Yamaha YHT-397 ($300)] or fashion your own with existing speakers using a male-to-male audio cable [Mediabridge 3.5mm ($8)] and an audio splitter [Belkin Splitter ($2)].

Read on for proper placement technique (red carpet may be necessary) and how to take care of your home theater once it's set up.

Location, Location, Location

Choosing the right room can make all the difference. If you're mounting a display above the fireplace, make sure you know about the dangers. Consider these elements while setting up your system.

• Floors — Your reclaimed cherry maple-wood flooring is beautiful, but it isn't ideal for sound quality. A room with bare tile or hardwood floors won't have great acoustics, but a large rug will aid in absorbing stray sounds.
• Wall placement — The TV should be mounted or placed along the short wall of a rectangular room — and the barer, the better. Windows and doors are portals for sound to travel away from your audience. If you must place the display by a window, heavy curtains should do the trick.
• Sound — Pull the seating area toward the center of the room, not against a wall, so that the rear speakers can project toward the viewing party.
• Cables — Go easy on these guys. Don't force cables into 90-degree angles, allow them to gently curve in relaxed bends. Also, be wary when stapling audio or video cables to the walls and floors, and only use staples designed for use with a coaxial cable. The wrong staples will cut off circulation. We recommend raceway covers to do the job.

Maintenance

• Dust — The enemy! Dust buildup can permanently damage your home electronics. So bust out that microfiber cloth and wipe down your devices as often as you can.
• Surge protectors — Your prized home theater is one blackout away from being completely fried. Invest in a surge protector and plug everything (we mean, everything) into the surge-protected power distribution unit.
• Space out the tech — Overheating is a common problem for large displays and complex audio systems. Make sure that the audio and video components have some room to breathe. Consult the device's manual if you're not sure how much clearance it needs.
• Warranty documents — Most equipment has at least a 30-day warranty, and some high-end devices come with one-year or three-year guarantees. Hang on to these documents and the original boxes (we promise, you're not being a hoarder) because it will save you time and frustration when your equipment shuts down.